What is the RB5009UPr+S+OUT?

The RB5009UPr+S+OUT is the outdoor version of the RB5009 series, designed for installation on towers or in external environments exposed to the elements. It features an IP66-rated waterproof enclosure and a redundant power system that allows the device to remain active even if 8 of the 9 available power sources fail. It is based on RouterOS v7 and offers advanced Ethernet connectivity, making it suitable for PPPoE termination, hardware bridging, and MPLS/VPLS services.

What are the main technical specifications?

The key specifications of the RB5009UPr+S+OUT include:

  • CPU: Quad-Core 88F7040 at 1.4 GHz (64-bit ARM architecture).
  • Memory and Storage: 1 GB DDR4 RAM and 1 GB NAND memory.
  • Ethernet Ports: 7 Gigabit ports, 1 2.5 Gigabit port, and 1 10G SFP+ slot.
  • USB: 1 USB 3.0 Type A port.
  • Power: Supports voltages from 24 to 57 V via a 2-pin connector or PoE-in on all Ethernet ports.
  • PoE-Out: Up to 130 W total, compatible with 802.3af/at standards or low-voltage passive PoE (depending on input voltage).
  • Power Consumption: Maximum 15 W for internal device power; maximum 150 W overall with connected devices.
  • Dimensions: 222 x 239 x 57 mm.
  • Operating Temperature: From -40°C to +70°C.

Who is it for and in which scenarios does it make sense?

This device is ideal for WISPs, small and medium-sized ISPs, or network administrators who need a reliable outdoor aggregation node. The extreme power redundancy makes it suitable for critical sites where a power outage or a PoE line failure must not cause a network blackout. It is particularly recommended for radio tower configurations, where ease of deployment and resistance to weather conditions are absolute priorities.

What to know before choosing it?

It is fundamental to note that power supply voltages cannot be mixed: the device operates in a 24-57 V range, but it does not support simultaneous input from sources with different voltages. Additionally, the PoE-Out mode (standard or passive) is determined by the voltage present on the 2-pin connector, as the board does not perform internal voltage conversion. If you use PoE-Out to power other devices, you must provide power to the RB5009UPr+S+OUT via the front 2-pin connector.

Frequently asked questions

Does the RB5009UPr+S+OUT support standard PoE?

Yes, the RB5009UPr+S+OUT supports PoE-in and PoE-out compliant with 802.3af/at standards, as well as low-voltage passive PoE. The specific mode depends on the power supply voltage provided to the device.

What is the power redundancy of the RB5009UPr+S+OUT?

The RB5009UPr+S+OUT offers 9 independent power options, including the 2-pin connector and PoE-in/out Ethernet ports. The system automatically selects the source with the highest voltage and maintains operation even if 8 sources fail simultaneously.

Is the RB5009UPr+S+OUT suitable for outdoor installations?

Yes, the RB5009UPr+S+OUT is designed for outdoor use thanks to its IP66-rated enclosure and its ability to operate in a temperature range from -40°C to +70°C, resisting rain, wind, and thermal fluctuations.

What network ports does the RB5009UPr+S+OUT offer?

The RB5009UPr+S+OUT features 7 Gigabit Ethernet ports, 1 2.5 Gigabit Ethernet port, and 1 10G SFP+ slot, along with a USB 3.0 port for expansions or storage.

Learn more on the MikroTik website: RB5009UPr+S+OUT page and official datasheet (PDF).